Vinaora Nivo Slider

Individual 820.640 GANC LongStroke

Feed lenghts up to 12,000mm

The LongStroke design of Individual fully automatic machines is available in all sizes in the series. An innovative, modular feed system allows feed lengths up to 12,000 mm.

  • Precise carbide saw band guides
  • Continuous band speed from 20 to 120 m/min using a frequency converter
  • Feed lengths up to 12,000 mm with a maximum material weight of 3,000 kg
  • Stable feed base with individually adjustable stand feet for exact setting of the feed unit
  • Freely positionable control panel with complete control elements and a large graphic display
  • Simple, intuitive operator guidance through programming and operating the saw machine.
  • Fast, easy mitre swivels thanks to smooth pivoting console mounting


Futuristic control technology

BOMAR Sägemaschinen Clear, simple operation, without limiting the range of functions — those are the
attributes of the controls used in automatic saw machines in the Individual series.

Close collaboration with renowned manufacturers of control electronics has given
rise to innovative operational designs that allow clear communication with the
operator and the shortest possible learning curve.

At customer request, the controls can be
connected over the Internet to the
service unit at the factory.
Error messages and
malfunctions are
promptly evaluated and
downtimes considerably reduced.

Synchron Die angetriebene Spänebürste läuft stets synchron zur Sägebandgeschwindigkeit.

Powered shavings brush always runs synchronized to the saw band speed.

Präzise und Stabil An beiden Säulen ist der Sägerahmen an hochpräzisen, spielfreien Linearführungen gelagert. Diese Führungen garantieren ein Maximum an Laufruhe und Schnittgenauigkeit.

Precise and stable
On both columns, the saw frame is mounted to high-precision, play-free linear guides. These guides guarantee maximally smooth operation and cutting precision.

Verschleißfrei Der Auflagetisch schwenkt bei Gehrungsschnitten mit dem Sägeband. Dadurch wird der Auflagetisch nicht eingesägt.

No wear
For bevel cuts, the supporttable swivels with the saw band. This ensures that the supporttable is never cut.

Gehrungsklemmung Die Gehrungsklemmung ist direkt an der Vorderseite der Schwenkkonsole angebracht und ermöglicht dadurch einen einfachen, unkomplizierten Arbeitsablauf.

Bevel clamp
The bevel clamp is right on the front of the pivoting console, thus allowing a simple, uncomplicated workflow.


Spielfrei Der Spannstock ist auf gehärtet und geschlinen Leisten geführt. Durch die spezielle Formgebung können die Führungsleisten jederzeit nachgestellt und der Spannstock stets spielfrei gehalten werden.

The vice is guided on hardened, ground rails. The special design allows the slide rails to be readjusted at any time and the vice to be held play-free.

Präzision Große Führungsschuhe aus vibrationsdämpfenden Guss in Kombination mit Hartmetall-Gleitführungen und verschleissarmen Führungsrollen sorgen für genaue, präzise Schnitte.

Large guide shoes made of vibration-damping cast material in combination with carbide slideways and low-wear guide rollers make for precise cuts.

Einfach. Klar. Übersichtlich. Das Bedienpult der Individual Halbautomaten ist einfach und übersichtlich gestaltet. Das beleuchtete Display bietet Statusund Fehlerfeldungen in Klartext.

Simple. Clear. Easy to use
The control panel on Individual semi-automatic devices is laid out simply and clearly. The lighted display gives status and error messages in plain text.

Sägebandspannung Zur Serienausstattung gehört unter anderem eine hydraulische Bandspannungsanzeige, sowie eine elektronische Sägebandspannungs- und Sägebandbruch-Kontrolle.

Saw band tensioner
Standard equipment includes a hydraulic band tension display, an electronic monitor for saw blade tension and saw band breakage, and more.



Certified Quality
All machine in Individual Serie are chcked by TÜV-Süd office and certified in conformity with actual machine directives.


A non-stop roll conveyer up to the main clamping device allows full support for the materials and little wear.



Cutting feed and cutting pressure are set individually at the control panel. The selected cutting pressure is displayed on a manometer.

Vollhubzylinder Großzügig ausgelegte Vollhubzylinder ermöglichen die Spannstockbedienung direkt vom Bedienpanel aus.

Full-lift cylinders
Generously sized full-lift cylinders allow vice operation right from the control panel.



ADFR – The highest precision. Faster cut.
Less wear

The ADFR system regulates the interplay of the cutting pressure and the cutting feed automatically in real time. A sensor gives the current load on the saw band and regulates the cutting feed according to the shape of the material. For larger cross cuts to the material, the cutting channel lengthens and the saw band's load increases. If the cutting feed in these ranges is not automatically adjusted, the saw band's life drastically decreases or the cutting time significantly drops due to a lower feed.


Technical data

Overview of technical data



A system solution for frictionless material flow

The new X handling system offers unprecedented flexibility for tailoring a handling system to individual needs and conditions. Load capacities and automation levels can be adjusted with perfect flexibility and modified at a later time. Besides the roll conveyor in a regular and propelled version, the X system comprises a rich array of options, from vertical rollers, to length measuring systems all the way to cross conveyor units and shifting devices.


h001-enHigh flexibility
With the new System X roll conveyors, the load capacity can be customized by the number of rollers and support feet used. The roll conveyor's feed profile even allows varying roller and foot distances on the same roll conveyor unit. When needed, additional rollers and/or support feet can be installed at any time.

h002Cross conveyor units
Easy on material in a trolley version, as a chain cross conveyor or as a slide unit with pushing fingers that can be used on both sides.
Length measuring systems
The handling program offers simple, precise length measuring systems in almost unlimited lengths for custom adjustment to your requirements. The versions range from a simple, completely manual measuring stop, to a digital measuring stop with hand wheel setting, all the way to a high-precision NC measuring stop with a sensitive limit switch for cutting heavy materials to exact length in coordination with propelled roll conveyors.
h004System X-HA
Simple, clear operation with a large display. From the membrane keyboard, the striking arm is pneumatically released or raised and lowered.
h005System X-HDA
Simple, clear operation with a large display. From the membrane keyboard, the striking arm is pneumatically released or raised and lowered.
h006System X-HNCA
Simple, clear operation with a large display. From the membrane keyboard, the striking arm is pneumatically released or raised and lowered.




Intelligent options for customization

The Individual series of semi-automatic devices comes standard with an incomparable range of equipment. With intelligent options and accessories, the machines can be customized in detail to individual requirements.


Bundle tensioning device
With an easily adjusted hydraulic cylinder, the bundle of material is tightened vertically.


A fine film of spray lubricant is spread from both sides onto the tooth tips, and onto the saw band clasps for better lubrication.


Hydraulic band tensioner
A powerful, large-dimension hydraulic cylinder is used for tensing the saw band. A pressure switch always keeps the band tension within the ideal range.


The laser projects the exact path of the saw band on the material.


A precise measuring tool for monitoring the saw blade tension when applying new saw bands.


Rinsing pistol for shavings
With its own efficient pump for rinsing accumulated shavings from support surfaces.


Digital bevel display
The digital bevel display is placed right on the bevel clamping lever for easy visibility. A precise magnet system provides definition of 0.1°.


Band path monitor
The saw cut is permanently monitored, and a signal is given if a programmable tolerance has been exceeded.


Clamping pressure regulation
A regulating screw is used to adjust the clamping pressure, and the maximum clamping force is shown on a manometer.


Bevel adjustment
Electromechanical bevel adjustment for DGH double bevel band saws. Adjustment expands control and decreases downtime.


Work light
Halogen work light for a bright working area. The light is mounted on a flexible arm and can be adjusted individually.


Connection parts
Suitable connection parts are available for the roll conveyor system of each machine version.